What does this symptom mean?
Only one speed works, extraction does not change between settings, or buttons stop responding. The symptom alone does not identify a failed part because several causes can produce the same behaviour. Proper diagnosis considers when the fault occurs, appliance model and whether it is constant or intermittent.
Likely causes
1. Dirty or failed control buttons
Dirty or failed control buttons. Similar symptoms can have different causes, so parts should not be replaced by guesswork.
2. A speed board or relay fault
A speed board or relay fault. Similar symptoms can have different causes, so parts should not be replaced by guesswork.
3. A capacitor or motor not responding at all speeds
A capacitor or motor not responding at all speeds. Similar symptoms can have different causes, so parts should not be replaced by guesswork.
4. An unstable electrical connection
An unstable electrical connection. Similar symptoms can have different causes, so parts should not be replaced by guesswork.
Safe checks before booking service
- Disconnect power and clean the outer panel only.
- Test each speed after a safe power reset.
- Check whether the light works to narrow the electrical scope.
- Do not dismantle the control panel yourself.
How a technician diagnoses the fault
The inspection begins by confirming the reported behaviour and safely testing the affected function. The technician then compares operation with model specifications and measures related components where required. The purpose is to find the root cause rather than replace the first part associated with the symptom.
| Inspection stage | What is checked? |
|---|---|
| Confirm the symptom | Reproduce the fault and identify timing and affected function. |
| External inspection | Assembly, cleanliness, moving parts, ventilation and visible connections. |
| Technical measurements | Test model-specific components related to the fault. |
| Post-repair test | Operate the appliance and confirm safety and stable performance. |
Parts that may be related
Speed switchControl boardCapacitorMotor
This is a list of possibilities, not a final diagnosis. Any part must match the model number and inspection result because a similar appearance does not guarantee identical dimensions, connections or ratings.
How to reduce repeat faults
- Clean or replace filters according to type and usage.
- Do not run the hood with heavy grease buildup.
- Monitor noise and vibration and keep extraction openings clear.
When to call Glem Gas maintenance
Call when the fault repeats after safe checks, when there is gas odour, abnormal heat or noise, or when access requires dismantling the appliance. Have the model number, symptom and governorate ready.